1：PETG Filament

JAYO PETG 3D Printer Filament Bundles, PETG Filament 1.1KG Cardboard Spools 1.75mm, Consumable Dimensional Accuracy +/-0.02mm

PETG Filament Features

1. Environmental protection and non-toxic;
2. Low shrinkage;Bright color;High transparency and good gloss.
3. Good toughness, not easy to be brittle, good acid and alkali resistance, excellent, weather resistance, and good adhesion.
4. Good dimensional stability, no cracks And warping.
Suitable for all types of FDM3D printers, suitable to Co-print all kinds of commonly used models, crafts, industry Pieces, advertising words, etc.

PETG filament is easy to use like PLA, durable strength like ABS

PETG Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 220-250℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 8-14
Melt index: 6-11g/10min
(220℃, 2.16kg)
Elongation at break: 210%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

2：PLA Meta Filamnet

JAYO PLA Filament 1.75mm, Upgraded PLA Meta 3D Printer Filament, Diameter Accuracy ± 0.02mm Neatly Wound Filament, High Fluidity, Fast Print 3D Printing Filament, 1/1.1KG Spool

PLA META Filament Features

1. Environmental protection, non-toxic, biodegradable;
2. Soft and warm colors
3. Low shrinkage rate;
4. High strength and rigidity;
5. Very good toughness, not easy to break
6. The printing temperature is 180~200°. Lower printing temperature, means more energy saving and environmental protection, reduce printer loss.
7. Good fluidity: The printing fluency is better than the existing PLA and PLA+, greatly improving the printing success rate.
8. Good fall resistance and impact resistance: After the fall test, the fall resistance is about one times better than the existing PLA and PLA+.

PLA META Filament Parameter

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Printing temperature: 180-200℃
Bottom plate temperature: Glue is required when not heated, and glue is not required when heated at 50-65°C
Heating 60-80℃, no glue
Rally KGF: 9-12
Melt index: 8-12g/10min (190℃, 2.16kg)
Elongation at break: 35%
Density: 1.24 (g/cm³)
Printing speed: 50-100MM/s
Bubbles: 100% zero bubbles

3：PLA Filament

PLA 3D Printer Filament, JAYO Neatly Wound PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Fit Most FDM 3D Printers, Good Vacuum Packaging Consumables, 1/1.1kg Spool

PLA Filament Features

1. Environmental protection , non-toxic , biodegradable ;
2. No Bubble , Low shrinkage , bright color ;
3. High strength and strong rigidity ;

It is suitable for all types of FDM3D printers , suitable for printing crafts , artworks and industrial design samples, etc.

PLA filaments have the advantages of incredible ease of printing Optimized printing quality, high purity with low shrinkage and superb layer bonding, meeting your demands for printing projects of functional parts with higher toughness.

PLA Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 200-230℃
Bottom plate temperature: need to apply glue when not heating
Heating 60-80℃, no glue
Rally (KGF): 11-16
Melt index: 7-9g/10min
(190℃, 2.16Kg)
Elongation at break: 4%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

4： TPU Filament

TPU Filament, JAYO Neatly Wound Shiny PLA 3D Printer Filament 1.75mm Dimensional Accuracy +/- 0.02mm, Fit Most FDM 3D Printers, Good Vacuum Packaging, 0.5KG/1KG Spool , Silky Black

TPU Filament Features

1. Easier to print, no longer painful for remote extrusion

2. Soft and silky, with good elasticity

3. Smooth surface, good appearance texture, similar to silk

4. Supports normal printing speed, making surprises come faster

5. The printing process is stable and will not produce burrs

6. Environmentally friendly, non-toxic, and cost-effective

TPU Filament Parameter

Wire diameter: 1.75MM
Tolerance: ±0.03MM
Printing temperature:
210-220℃: 50 -100mm/s
220-240℃: 100-200mm/s
Base temperature: 50-60℃
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=330M,

5：PLA PLUS Filament

JAYO 3D Printer Filament PLA Plus 1.75mm, JAYO Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1/1.1 kg Spool

PLA+ Filament Features

1. Environmentally friendly, non-toxic, biodegradable;
2. Bright color;
3. Low shrinkage;
4. High strength and high rigidity;
5. Good toughness and not easy to be brittle;

PLA PLUS is 10 times higher toughness than PLA and has excellent toughness.

PLA+ Filament Parameter

Wire diameter: 1.75/3.0MM
Tolerance: ±0.02MM
Printing temperature: 210-235℃
Floor temperature: 70-80℃
Rally (KGF): 11-15
Melt index: 9-11g/10min
(190℃, 2.16kg)
Elongation at break: 45%
Printing speed: 50-100MM/s
Air bubbles: 100% zero bubbles

5：PLAMATTE Filament

JAYO 3D Printer Filament PLAMATTE 1.75mm, JAYO Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1/1.1 kg Spool

PLAMATTE Filament Features

PLA Matte Filament Features
1. 【PLA Features & Matte Color】- JAYO's newly upgraded Matte PLA Filament colors retain the original JAYO PLA advantages: Easy Printing, No Clogging, while adding more color options. Matte PLA can print prints with non-glossy colors and frosted textures, suitable for more premium and mysterious 3D models.

2. 【SUNLU 100% Wound Neatly 3D Filament】- JAYO R&D team has mastered advanced technology and produced 100% Neatly Wound 3D Printer Filament, which is impossible for other brands. No knot, no winding, improve printing efficiency.

3.【Recommend Settings & Easy to operate】- We recommend printing the PLA Matte Filament at nozzle temperature of 200-230°C, bed temperature of 50-65°C, and printing speed of 50-100mm/s. JAYO PLA MATTE Filament Dimensional Accuracy +/- 0.03mm. Minimum tolerance and low warping to ensure consistent feeding and stable prints, good layer bonding, less stringing, easy handling, resulting in an outstanding surface finish and are highly precise.

plamatte Filament Parameter

PLA matte Product Parameter:
Wire diameter: 1.75mm
Tolerance: ± 0.02MM
Printing temperature: 205-215 ℃
Bottom plate temperature: Apply glue when not heated
Heating 50-60 ℃ without applying glue
Printing speed: 50-100MM/s
Bubble: 100% zero bubble
Net weight: 1.1KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM (1KG)=330M

5：HS-PLA Filament

JAYO 3D Printer Filament HS-PLA 1.75mm, JAYO Neatly Wound PLA Filament 1.75mm PRO, PLA+ Filament for Most FDM 3D Printer, Dimensional Accuracy +/- 0.02 mm, 1/1.1 kg Spool

HS-PLA Filament Features

High Speed PLA Filament Features

【Print Faster】 -JAYO high-speed 3D printer PLA filament, designed to turbocharge your printing from slow to swift. Experience a colossal 500% increase in flowability, ensuring smooth printing even at speeds exceeding 250mm/s, without clogs or filament shortages. Bring your ideas to life with high-speed printing, on average, save 70% printing time.

【Efficient Cooling】 -High speed PLA filament boasts a 180% boost in heat dissipation, enabling quicker cooling and curing than regular PLA filament under the same conditions. This prevents 3d filament material buildup during fast prints, improving printing speed while also ensuring accuracy and mechanical performance.

【High Speed PLA Printing Tips】 -The average printing temp of JAYO High Speed PLA filament is lower than regular PLA filament, saving time and energy consumption. As HS PLA Filament is temperature-sensitive, please set slicing parameters according to recommended print speed and temp matching based on your 3D printer. If stringing occurs, please reduce print temp appropriately.

HS-PLA Filament Parameter

Wire diameter: 1.75MM
Tolerance: ±0.02MM
Bottom temperature: 50-60℃
Bubble: 100% zero bubble
Net weight: 1 KG/roll
Gross weight: 1.3 KG/roll
Length: 1.75MM(1KG)=330M,
Printing speed: 190-210℃ 50-150mm/s
210-230℃ 150-300mm/s
230-260℃ 300-600mm/

Shipping

* You can check parcel tracking information through this ways:

1.https://www.17track.net

2.http://track.4px.com

3. Leave a message to us, then we will check the parcel information for you.

After Sale

*We offer a one-year warranty for electronic products , but damage caused by using non original brand filament or not following the instructions correctly is not covered by the warranty.

*Please provide us with the proof of video if products have any problem after receiving the parcel within 7 days, we will offer replacement or refund after confirming the problem.

Contact Us

*If satisfied with our product, please kindly leave us a positive feedback and 5 stars.

*If any questions, you may contact our customer service in 24 hours before negative feedback. We'll try our best to help you.

We look forward to cooperating with you next time!